Updated November 2026

North west cycling routes cover a wide range of terrain, from flat canal towpaths to steep mountain passes. This guide shows you how to choose a route that matches your fitness, bike and time, and how to plan the ride before you leave home. By the end, you will know which questions to ask and which details to check before you commit to a day in the saddle.

Step 1: Decide What You Want From the Ride

Start with three numbers: the distance you can comfortably ride, the total climbing you can handle, and the number of hours you have. Most riders find that their average moving speed on hilly ground is noticeably lower than on flat roads, so a 60-mile route with 4,000 feet of climbing may take far longer than the same distance on the flat. Write down your target numbers before you look at any map.

Shopping for one? See our guide: Finding Local Free Cycling Routes: 5 Best Guides Compared for 2026.

Step 2: Match the Terrain to Your Bike

Road bikes suit smooth tarmac and quiet lanes, while gravel and hybrid bikes handle unpaved tracks and rougher surfaces. Check the surface on any route you plan to ride, because many north west cycling routes combine paved lanes with stretches of loose stone or packed dirt. Tyre width, gearing and brake type all affect how comfortable a long descent or a rough section will feel.

Step 3: Plan the Route Itself

Use a mapping tool that shows elevation profiles, and draw the route on a map rather than accepting a single default line. Look for a loop rather than an out-and-back, since loops avoid retracing hills and give you more variety. Mark water stops, cafés and public toilets along the way, and check whether they are open on the day you plan to ride. For a broader sense of how regional routes are laid out, you can compare the structure of a guide such as Cycling Routes North Wales: 6 Routes, Distances and Tips for 2026, which shows how distances and climbs are typically presented.

Checklist before you leave

  1. Total distance and total climbing in feet or metres
  2. Longest stretch without services
  3. Surface type for each section (tarmac, gravel, trail)
  4. Sunrise, sunset and expected weather for the day
  5. Bail-out points where you can cut the ride short
  6. Phone charge, offline map download and emergency contact details

Step 4: Compare Routes by the Numbers

A quick comparison table helps you see the trade-offs between routes of different types.

Route type Typical surface Climbing demand Best for
Coastal loop Mostly tarmac Moderate, with short sharp climbs Scenic rides and first long days
Upland pass route Tarmac, some rough sections High and sustained Experienced climbers
Canal or rail trail Compacted surface Very low Relaxed rides and families
Gravel loop Mixed unpaved Variable Riders with wider tyres

Common mistakes to avoid

  • Planning by distance alone and ignoring total climbing.
  • Assuming a phone signal will be available in remote valleys.
  • Skipping a bike check, especially tyre pressure and brake pads, before a long day.
  • Riding a route you have never seen in poor light or bad weather.
  • Forgetting that wind direction can add real effort on exposed sections.

A good set of tyres with puncture protection makes a long day more predictable, especially on mixed surfaces. View on Amazon

A handlebar-mounted or frame-mounted bike computer helps you track distance, climbing and navigation without stopping to check a phone. View on Amazon

A compact pump with a pressure gauge lets you top up tyres at the roadside. View on Amazon

FAQ

How far should a first long ride on north west cycling routes be?

Many riders start with a distance they can finish comfortably at a steady pace, then add a little each week. Choose a route with modest climbing for your first attempt, and keep a bail-out option available.

Do I need a gravel bike for north west cycling routes?

Not always. A road bike is enough for routes that stay on paved roads, but wider tyres help on any section with loose surface. Check the surface of each route before you decide.

How do I confirm current conditions on a route?

Check the official route website or local council pages for closures and surface changes, and check opening times for cafés and services directly. Details can change, so confirm them before you set out.

Conclusion

Choosing north west cycling routes comes down to matching distance, climbing and surface to your fitness and bike. Work through the planning steps, use the checklist, and leave a margin for weather and fatigue. A well-planned route is far more enjoyable than one chosen in a hurry.

Claire Whitaker

About Claire Whitaker

Claire Whitaker is part of our editorial team and reviews and edits our bike touring & bikepacking guides, checking product details against manufacturer specifications and owner feedback.