Updated November 2026

Off road cycling routes are unpaved paths, gravel roads, singletrack and doubletrack that take you away from pavement. This guide shows you how to find them, judge whether a route suits your skills, plan the miles and climbs, and get ready to ride safely. By the end, you will have a short list of routes and a clear plan for the day.

Step 1: Decide What Kind of Off-Road Riding You Want

“Off road” covers a wide range of surfaces, and the right route depends on your bike and your comfort level. Gravel roads are usually the easiest entry point, with wide, mostly smooth surfaces that work on drop-bar and hybrid bikes. Doubletrack is a two-wheel-width dirt road, often with grass in the middle. Singletrack is a narrow footpath that demands more technical skill, balance and attention.

Shopping for one? See our guide: Finding Local Free Cycling Routes: 5 Best Guides Compared for 2026.

Be honest about your fitness and handling before you pick a route. A beginner should start with a short out-and-back on gravel or smooth doubletrack and build from there.

Step 2: Find Routes and Read the Data

Start with official sources. Land management agencies, state parks and county trail offices often publish maps and GPS files. Regional resources can help you narrow the field, and our guide to Finding Regional Cycling Routes and State Resources explains where to look. Route-sharing platforms and mapping apps are also useful, but check that the trail is still open and legal for bikes.

Once you have a candidate route, check these numbers:

  • Distance: the total one-way and round-trip miles.
  • Elevation gain: the total climbing in feet. A rule of thumb is that 1,000 feet of climb adds significant effort to a ride of the same length.
  • Surface type: gravel, dirt, rocky, sandy or muddy.
  • Technical rating: many trail systems use an easy, intermediate or difficult scale. Use it as a guide, since ratings vary between agencies.
  • Water and bailout points: where you can refill and where you can shorten the ride if needed.

For examples of how route guides present this information, see Trails for Bike Riding: How to Find Routes, Plan Miles and Ride Safely (2026).

Step 3: Plan the Ride and Check Conditions

Plan your pace from the elevation data. Off-road riding is slower than pavement, and climbs on loose surfaces take more out of you. Many riders average noticeably slower on dirt than on paved roads of the same length, so build in extra time.

Check conditions before you go. Recent rain can turn clay into slick mud and make sand deep and hard to ride. Seasonal closures are common in high country and during wet or wildlife-sensitive periods. Check the managing agency’s website or call ahead to confirm current trail status, closures and any permit rules. Current dates, hours and fees should always come from the official source.

Step 4: Prepare Your Bike and Your Gear

Use a tire width suited to the terrain. Wider tires with lower pressure give more grip and comfort on loose surfaces, but they add rolling resistance on hard-packed gravel. Carry a basic kit: a spare tube or tubeless repair supplies, a multitool, a pump or CO2 inflator, water, food, a phone, and a light if there is any chance you will be out after dark. Tell someone your route and expected return time.

Common Mistakes to Avoid

  • Choosing a route based on distance alone and ignoring elevation gain.
  • Riding wet, muddy trails that cause erosion and damage the surface for everyone.
  • Assuming a map is current without checking for closures.
  • Carrying too little water for the heat and effort of the ride.
  • Skipping a practice ride on your bike before committing to a long off-road day.
  • Multitool with chain breaker: useful for trailside adjustments and chain repairs. View on Amazon
  • Hydration pack: keeps water accessible on long climbs and rough sections where stopping is awkward. View on Amazon
  • Compact bike pump: lets you correct tire pressure on the trail after a flat. View on Amazon

FAQ

What is the easiest type of off road cycling route for beginners?

Smooth gravel roads and wide, well-graded doubletrack are the best starting points. They have few technical obstacles and let you focus on pacing and handling.

Do I need a mountain bike for off road cycling routes?

Not always. Gravel bikes and hybrids handle many gravel and doubletrack routes well. Singletrack with steep, rocky or technical sections is better suited to a mountain bike.

How do I find out if an off road route is open?

Check the managing agency’s website or call the local office. Closures can change with weather and season, so confirm before you ride.

Conclusion

Good off road cycling routes start with an honest match between the terrain and your skills. Read the distance, climbing and surface data, check conditions with the managing agency, and carry the basics. Start with an easier route, then move up as your confidence grows.

Claire Whitaker

About Claire Whitaker

Claire Whitaker is part of our editorial team and reviews and edits our bike touring & bikepacking guides, checking product details against manufacturer specifications and owner feedback.